35100 Control Panel Driver

1. Turn the temperature and light knobs to the off position (counterclockwise).
2. Remove the two phillips head screws securing the control panel to the skirting.
3. Remove the four plastic screws located behind the coverplate.
4. Pull the control panel forward off the D-shaft drivers.
5. Remove the two D-shaft drivers.

CONTROL PANEL INSTALLATION

1. Place the D-shaft drivers onto the thermostat and light switch shafts.
2. Turn the both shafts to the off position (counterclockwise).
3. Ensure that the knobs of the control panel are still in the off position.
4. Install the control panel onto the D-shaft drivers.
5. Install the four plastic screws located behind the coverplate.
6. Install the two phillips head screws securing the control panel to the skirting. .