The Soothing 7 Jet is a larger jet with seven outlets.
Usually Ships Within 2 Business Days
Buy with Confidence:
Customers who bought this also bought
Product Description
Soothing 7 Jet Face
This part is a replacement soothing 7 jet face for select Hot Spring hot tub models. Contains a front and rear wall fitting, two o-rings, a gasket, and a jet face.
Crafted to be compatible with old and new spa models. Compatible with a variety of the 1997 to 2011 Hot Spring Highlife spa models.
*Check specs section for full list of compatible models and years.
Product Specifications
Watkins
Make
Model
Date Range
Hot Spring
Grandee
1997-2005
Hot Spring
Vista
2004-2005
Hot Spring
Envoy
2004-2005
Hot Spring
Vanguard
2001-2005
Hot Spring
Jetsetter
1997-2005
Hot Spring
Prodigy
1997-2005
Hot Spring
Sovereign
1997-2005
Hot Spring
Classic
1997-2000
Hot Spring
Landmark
1997-2003
Hot Spring
Highlife ILE
2003
Item
Description
Part number
1
kit wall fitting
71362
2a
Jet Face White
71366
2b
Jet Face C Grey
71367
2c
Jet Face W Grey
73293
2d
Jet Face Taupe
72486
2e
Jet face escutcheon c grey
73902
2e
Jet face escutcheon w grey
73814
3
Gasket
36535
4
o ring
35986
5
Front Wall Fitting
36087
6
o-ring
36153
Removal
Open or remove the spa cover.
Remove the jet by grasping the jet faceplate and pulling it away from the spa shell.
With jet in hand, two o-rings should be on the rear portion of the faceplate. If either o-ring is not present, inspect the inside of the front wallfitting and remove the missing o-ring.
To reinstall the jet, reverse steps 1 to 3. Important: Make sure that the o-rings are properly seated.
Removal
Open or remove the spa cover.
Remove the jet by grasping the jet faceplate and pulling it away from the spa shell.
With jet in hand, two o-rings should be on the rear portion of the faceplate. If either o-ring is not present, inspect the inside of the front wallfitting and remove the missing o-ring.
To reinstall the jet, reverse steps 1 to 3. Important: Make sure that the o-rings are properly seated.