In Stock

72201 Jet Pump 1.5hp 2 speed

Name: 72201 Jet Pump 1.5hp 2 speed
Brand: Watkins
SKU: 72201
Price: 568.63 USD
Availability: InStock

$568.63

Used in Highland Series Spas from 2002-2005, Aventine Spas from 2006-2007, and Cascade Spas from 2002-2003.

Usually Ships Within 2 Business Days

Buy with Confidence:

Customers who bought this also bought

Product Description

1.5 Hp, 115 VAC, 60 Hz, 2 Sp, XP2

The jet pump provides water pressure for the hydrotherapy system by recirculating water from the spa, drawing it through the skimmer and filtration system, and forcing the water through the fixed jets, rotary jets and jetstream. These pumps are designed for the presence of water at all times.

The opening at the bottom of the door is a vent for the heat generated by the operation of the jet pump. The vent will eliminate the problem of overheating pump motors and protect the other components from excessive heat. It is important that the vent opening be kept clear at all times. If the vent opening becomes obstructed, overheating of the jet pump may occur.

72201 Jet Pump 1.5hp 2 speed is for the following models:

Make	Model	Date Range
Hot Spot	SX	2011-Current
Hot Spot	SLXtra	2001-2002
Hot Spot	Sprint	2010-2011
Hot Spot	Dash	2010-2011
Hot Spot	Tobago	2003-2005
Hot Spot	Trinidad	2003-2005
Solana	SX	2006-2010
Solana	TX	2006-2010
Solana	RX	2006-2009
Caldera	Aventine	2010-2015
Caldera	Cumberland	2002-2009
Caldera	Cascade	2000-2003
Caldera	Tarino	2013-Current
Caldera	Cima	2010-2011
Caldera	Lina	2010-2011
Caldera	San Gabriel	2008
Caldera	Oasis	2001-2007

Please note if your tub previously used a pump with 1-capacitor, plumbing may need to be redone for a 2-capacitor pump

Product Specification

Watkins

Specifications:

2.5 HP, 2 SP, 230V, 60 HZ, 11 AMP (High Speed)
2.5 HP, 2 SP, 230V, 60 HZ, 3.3 AMP (LowSpeed)

Removal

Disconnect power to the spa.
Access the equipment compartment.
Drain the spa.
Disconnect the the jet pump from the control box.
Remove the copper bonding wire from the bonding lug on the jet pump motor.
Drain the pump by removing bleedline from the drain barbfitting or plug.
Turn the jet pump unions counterclockwise on the intake and discharge of the jet pump to disconnect them from the plumbing.
Note: Make sure to save the union o-rings.
Remove the mounting bolt(s) securing the jet pump to the equipment compartment floor.
Remove the jet pump from the equipment compartment.
To reinstall the jet pump, reverse steps 1 to 9.
Important: Make sure that the jet pump union o-rings are properly seated when re-tightening the unions.

Item No.	Part No.	Description
1	71415	Manifold XP Manetek
2	**	Motor, mag, 48fr, 1.5 hp, 8.0/16.0a, 230/115v
3	71036	Fitting, compress 2" w/o-ring
4	71693	Volute 48fr xp2
5	71447	Seal, xp
6	71404/na	Impeller 1.5 hp, xp
7	71409	Wear ring, xp
8	71554	O-ring, volute
9	71696	Cover, suction xp2
10	32267	Drain plug, pump
11	72344	Kit, cal, pump hose duct
12	017066	Mount, rubber-pump
13	72462	Cord assy, pump 14/3, 60" straight yr2002
14	71413	Screw, 8-32 x 5/8, (xp volute)
15	34447	O-ring, compress fitting 2"
16	71594	O-ring, drain
*	72992	Pump, 1.5 hp, 230v 60 hz, 1 spd, xp2 (2")

Questions

()

()

Search By Series / Model

Shopping Cart

72201 Jet Pump 1.5hp 2 speed

Customers who bought this also bought

Please note if your tub previously used a pump with 1-capacitor, plumbing may need to be redone for a 2-capacitor pump

()

()

Need help finding the model number?

Need help finding the serial number?

72201 Jet Pump 1.5hp 2 speed

Customers who bought this also bought

**Please note if your tub previously used a pump with 1-capacitor, plumbing may need to be redone for a 2-capacitor pump**

Please note if your tub previously used a pump with 1-capacitor, plumbing may need to be redone for a 2-capacitor pump