| Make |
Model |
Date Range |
| Hot Spot |
Relay |
2010-Current |
| Hot Spot |
Rhythm |
2010-Current |
| Hot Spot |
Tempo |
2010-Current |
| Hot Spot |
Mallorca |
2003-2009 |
| Hot Spot |
La Palma |
2008-2009 |
| Hot Spot |
Sprint |
2010-2011 |
| Hot Spot |
Dash |
2010-2011 |
| Caldera |
Martinique |
2008-2015 |
| Caldera |
Palatino |
2010-Current |
| Caldera |
Marino |
2010-Current |
| Caldera |
Vanto |
2011-Current |
| Caldera |
Palomar |
2004-2005 |
| Caldera |
Olympia |
2002-2009 |
| Caldera |
Cima |
2010-2011 |
| Caldera |
Lina |
2010-2011 |
- 2.5 HP, 2 SP, 230V, 60 HZ, 11 AMP (High Speed)
- 2.5 HP, 2 SP, 230V, 60 HZ, 3.3 AMP (LowSpeed)
-
|
| |
|
Removal
|
- Disconnect power to the spa.
- Access the equipment compartment.
- Drain the spa.
- Disconnect the the jet pump from the control box.
- Remove the copper bonding wire from the bonding lug on the jet pump motor.
Drain the pump by removing bleedline from the drain barbfitting or plug.
- Turn the jet pump unions counterclockwise on the intake and discharge of the jet pump to disconnect them from the plumbing.
Note: Make sure to save the union o-rings.
- Remove the mounting bolt(s) securing the jet pump to the equipment compartment floor.
- Remove the jet pump from the equipment compartment.
- To reinstall the jet pump, reverse steps 1 to 9.
Important: Make sure that the jet pump union o-rings are properly seated when re-tightening the unions.
|
| Item No |
Part No |
Description |
| 1 |
71415 |
Magnifold xp Magnetek |
| 2 |
** |
Motor, mag, 48fr, 1.5/.18 hp, 8.0/2.6a, 230v |
| 3 |
71036 |
Fitting, compress 2" w/o-ring |
| 4 |
71693 |
Volute 48fr xp2 |
| 5 |
71447 |
Kit, shaft seal assembly |
| 6 |
71404/na |
Impeller 1.5 hp, xp |
| 7 |
71409 |
Wear ring, xp |
| 8 |
71554 |
o-ring, volute |
| 9 |
71696 |
Cover, suction xp2 |
| 10 |
32267 |
Drain plug, pump |
| 11 |
72344 |
Kit, cal pump hose duct |
| 12 |
017066 |
Mount, rubber-pump |
| 13a |
72178/na |
Cord 2-spd 14/4 60in pre2002 |
| 13b |
72461 |
Kit, pump cord 14/4 2spd strs 2002 - curr |
| 14 |
71413 |
Screw, 8-32 x 5/8, (xp volute) |
| 15 |
34447 |
O-ring, compress fitting 2" |
| 16 |
71594 |
O-ring, drain |
| * |
72991 |
Pump, 1.5 hp, 230v 60 hz, 2 spd, xp2 |
|
