In Stock

73306 Screw Cover for Moto-Massage, Warm Grey

Name: 73306 Screw Cover for Moto-Massage, Warm Grey
Brand: Watkins
SKU: 73306
Price: 6.90 USD
Availability: InStock

$6.90

The Moto-Massage is a jet that automatically travels up and down to massage a person's back. The mixing of air and water in a jet, along with a playable spine causes the sweeping motion of the Moto-Massage. The intensity and speed of the Moto-Massage can be adjusted with the air control valve. The Moto-Massage is curved to fit the curvature of the back.

Discontinued

Usually Ships Within 2 Business Days

Buy with Confidence:

Customers who bought this also bought

73305 Faceplate Moto Ovals Warm Grey

$42.84

Out of stock

73564 Dual Moto Jet Assembly Niche Air Fitting

$9.32

Out of stock

31228 1/2 Inch Spring Clamp

$1.39

Out of stock

Product Description

Update: Discontinued; Use Part: 36510

The Moto-Massage consists of a jet nozzle, water tube, threaded fitting, vertebra and an air tube with an o-ring. The Moto-Massage is held in place by a special recess behind the spa shell. A shim is used to assist in proper movement of the Moto-Massage.

Compatible with 2004 to 2008 Hot Spring Highlife spa models.

*Check specs section for full list of compatible models and years.

Product Specifications

Watkins

Item	Description	Part Number
1a	Facia Plate Duel Moto Cool Grey	73537
1b	Facia Plate Duel Moto Warm Grey	73538
2	screw 10-16	34366
3a	screw cover cool grey	36510
3b	screw cover warm grey	73306
4	duel moto jet warm grey	73542
5	air tube w/ oring	73539
6	abrasion cap	30723
7	o ring Moto air tube	33020
8	Niche Air fittting (buy assembly)	73540
9	Manifold w/ airline assembly	73540
**	Check Valve	38390

Removal

Open or remove the spa cover.
Using a standard blade screwdriver, remove the three faceplate screw covers.
Remove the three screws securing the Moto Massage faceplate to the spa.
Remove the Moto Massage faceplate.
Reach into the jet recess and locate the air tube. Gently remove this tube from the barbed nipple at the back of the recess.
Grasping the base of the Moto Massage (end closest to the rear of the jet recess) gently turn the entire assembly counterclockwise until it can be removed.
To reinstall the Moto Massage, reverse steps 1 to 6.

Important Instructions Regarding Moto Massage Alignment:

In order the for the Moto Massage to operate properly it is imperative that the Moto Massage nozzle be properly positioned after the assembly is tightened in the Moto niche.

To properly align, ensure that the two holes located on the nozzle face are position horizontally and that the Moto assembly travels vertically within the niche.

The following are the major causes of Moto-Massage failure;

Shim misaligned.
Low Water flow due to jet pump malfunction or dirty, clogged filters.
No or improper air mixture due to air valve failure, air line disconnected, frozen air lines, or non-operative check valves.
Moto-Massage nozzle misaligned

Specifications:

(back to top)

Removal

Open or remove the spa cover.
Using a standard blade screwdriver, remove the three faceplate screw covers.
Remove the three screws securing the Moto Massage faceplate to the spa.
Remove the Moto Massage faceplate.
Reach into the jet recess and locate the air tube. Gently remove this tube from the barbed nipple at the back of the recess.
Grasping the base of the Moto Massage (end closest to the rear of the jet recess) gently turn the entire assembly counterclockwise until it can be removed.
To reinstall the Moto Massage, reverse steps 1 to 6.

Important Instructions Regarding Moto Massage Alignment:

In order the for the Moto Massage to operate properly it is imperative that the Moto Massage nozzle be properly positioned after the assembly is tightened in the Moto niche.

To properly align, ensure that the two holes located on the nozzle face are position horizontally and that the Moto assembly travels vertically within the niche.

Item	Description	Part Number
1a	Facia Plate Moto White	36079
1b	Facia Plate Moto C Grey	36511
1c	Facia Plate Moto W Grey	73305
2	Screw 16x3	34366
3a	Screw Cover Moto White	36144
3b	Scrrew Cover Moto c grey	36510
3c	Screw Cover Moto w grey	73306
3d	Screw Cover Taupe	71896
4	Moto Jet Assembly white	73307
5	Air Tube with o oring	70307
6	Abraision cap (air tube)	30723
7	O ring moto air tube	33020
8a	Extrusion shim MM Short	36143
8b	Extrusion shim MM Long	36557
*	Check Valve	38390

* Non Illustrated Part

Removal

Open or remove the spa cover.
Using a standard blade screwdriver, remove the three faceplate screw covers.
Remove the three screws securing the Moto Massage faceplate to the spa.
Remove the Moto Massage faceplate.
Reach into the jet recess and locate the air tube. Gently remove this tube from the barbed nipple at the back of the recess.
Grasping the base of the Moto Massage (end closest to the rear of the jet recess) gently turn the entire assembly counterclockwise until it can be removed.
To reinstall the Moto Massage, reverse steps 1 to 6.

Important Instructions Regarding Moto Massage Alignment:

In order the for the Moto Massage to operate properly it is imperative that the Moto Massage nozzle be properly positioned after the assembly is tightened in the Moto niche.

To properly align, ensure that the two holes located on the nozzle face are position horizontally and that the Moto assembly travels vertically within the niche.

Questions

()

()

Search By Series / Model

Shopping Cart

73306 Screw Cover for Moto-Massage, Warm Grey

Customers who bought this also bought

()

()

Need help finding the model number?

Need help finding the serial number?

73306 Screw Cover for Moto-Massage, Warm Grey

Customers who bought this also bought